FISCHER 547031 - Solar system for flat roofs with 10° inclination and East - West panel orientation SW-II-EW BML 10°

Description

System Solar-Wind II East - West Flat roof system with tilt 10 ° and oriented East - West panels Benefits: * No hole in the roof: the Solar-Wind II East-West system is locked with small modular ballast concrete. * Fast: the installation time for the Solar-Wind II East-West system is 10 minutes per kWp per operator. * Lightweight: the reduced inclination of the panels (10 °) reduces the effect of the action of the wind on the system, and then the number of weights in coverage. * Complete: The system is suitable for a wide range of panels (width 950 ÷ 1050 mm x height 1559 ÷ 1690 mm). * Versatile: the system is modular, allowing an extremely flexible panels layout. * Electrically Safe: special center and end terminals allow the grounding of the system. * Tested: tested in the wind tunnel up to 240 km / h. Versions: * Aluminum brackets AW 6060 T66 / T5 according to EN 755-2: 2013 * A2-70 stainless steel bolts to EN ISO 3506-1 / 2: 2009 Suitable for: * Solar-Wind II East-West System (Flat roof without drilling) Possible configurations: * Single module horizontally Function: * Define the installation layout taking into account the distances to cover edges and obstacles. * Define the number of weights to be used for each individual element (brackets or port ballast) as a function of the snow and wind loads of the installation area of the plant, according to the national regulations. * Place the SW-EW B brackets (front and middle) on the cover, as planned. * Place the solar panels on the brackets and secure them using the SW-MC terminals and SW-MF. * Place the ballast as designed. * Protecting cover interposing the protective bearings SW PAD under the ballast. Adapté à : Solar Wind II Est - Ouest Épaisseur [mm] : 6 Filetage : M 8 Poids [g] : 1130